Actually plays fine here. Jim- WA9FPT ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Sunday, March 19, 2006 16:00 PM Subject: Re: [Repeater-Builder] Quick CW ID'er
> > "The page cannot be found." > > Neil - WA6KLA > > ---- Original Message ---- > From: [EMAIL PROTECTED] > To: Repeater-Builder@yahoogroups.com > Subject: Re: [Repeater-Builder] Quick CW ID'er > Date: Sun, 19 Mar 2006 13:57:20 -0800 > > >The ID-8 was used in this project - and there are some > >photos that might help you to decide if it's the unit for you. > > > ><http://www.repeater-builder.com/micor/micor-shelf-id8.html> > > > >Since you will be injecting it into the mic jack you won't > >need the op-amp-buffer that the project in the photos > >needed. > > > >Mike WA6ILQ > > > >At 04:45 AM 03/19/06, you wrote: > >>Communications Specialists (the folks who make tiny PL > >>encoders and decoders) also has a CW ID board that > >>might do the trick. I guess it depends on your idea of > >>"cheap", but I think it's around $50 and would do the > >>trick for commercial as well as amateur stations. > >> > >>Bob M. > >>====== > >>--- wa9ba <[EMAIL PROTECTED]> wrote: > >> > >> > Has anyone came up with a cheap easy CW ID'er for a > >> > GR 500 repeater? > >> > I was hoping I could find something that would say > >> > plug into the mic > >> > socket that would ID every 10 minutes. > >> > Bill WA9BA > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > Yahoo! Groups Links > >> > > >> > > >> > [EMAIL PROTECTED] > >> > > >> > > >> > > >> > > >> > > >> > >> > >>__________________________________________________ > >>Do You Yahoo!? > >>Tired of spam? Yahoo! Mail has the best spam protection around > >>http://mail.yahoo.com > >> > >> > >> > >> > >> > >>Yahoo! Groups Links > >> > >> > >> > >> > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
