Thanks all for advice !! AP.
--- In Repeater-Builder@yahoogroups.com, Bryon Jeffers K0BSJ
<[EMAIL PROTECTED]> wrote:
>
> You can also use the MRTI connector and program the Quantar to
give MRTI
> priority and be a base not a repeater. All signals are present on
the DB25
> on the rear of the chassis. The other way is by using the 50 pin
telco
> connector on the rear and having the "Wildcard" option installed
which is
> on or part of the "Wireline Interface"board....
>
> Also as NJ902 says, if your are wanting to pass or do P25 you use
the
> DIU3000 between the Quantar and the external controller...
>
> Hope this helps...
>
> Bryon K0BSJ
>
>
> At 02:08 PM 4/11/2006, you wrote:
> >--- In Repeater-Builder@yahoogroups.com, "ANTHONY" <ATGP@> wrote:
> >"DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR
> >REAPEATER...
>
>____________________________________________________________________
_
> >
> >You cannot replace the Quantar's internal controller which is
> >necessary for the station to operate, however, you can interface
the
> >Quantar to external devices such as a CAT controller. That way
you
> >can get features that the Quantar does not have such as voice
ID's,
> >courtesy tones, announcements and so on.
> >
> >There is a tab in the Quantar service manual called "System
> >Applications" that shows how to make the connections for PTT,
COR, Rx
> >and Tx audio.
> >
> >To do this, the Quantar must have a wireline interface board
installed.
> >
> >This also presumes that you are talking about analog only
operation.
> >If you want to do P25 digital or mixed-mode operation, you will
> >require a DIU3000 to host the interface to an axternal controller.
> >
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
