Thank's Jim for reply, About DTMF, I use many radios like TH-D7A and other... I'm sure, I do not over modulate, I transmit DTMF at ±3.0KHz and modulation with CG at ± 4.7KHz max.
At this time I have an old Cushman CE-4 to check my system but in past a beautiful IFR COM-120B will give the same results. So, I will inform the group if I find other thing about that. Best 73' Eric VE2VXT -----Message d'origine----- De : Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] De la part de Jim B. Envoyé : 11 mai, 2006 09:19 À : Repeater-Builder@yahoogroups.com Objet : Re: [Repeater-Builder] Help with GE TMX-1000 Eric Vincent wrote: > I use these radios for UHF link and I like to remote control my Echolink > station via the net. I was made many tests to pass DTMF but I think the RX > CG don?t like DTMF and cut all the time, on and off and on and off... Either the DTMF you're sending is bad-likely too hot and going into clipping-or the receiver isn't aligned properly. Or one end or the other is off freq. -- Jim Barbour WD8CHL Yahoo! Groups Links -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.6/336 - Release Date: 2006-05-10 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.6/336 - Release Date: 2006-05-10 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/