Thanks Juan. If I understand you correctly, it should work as I speculate.
John in Tucson
----- Original Message -----
From: "Juan Tellez" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Wednesday, October 25, 2006 1:43 PM
Subject: RE: [Repeater-Builder] Re: TKR-820 PL Control
The green wire is the encode tone, just ground it or put a SPST switch
of your choice and control it with your controller or with COR from the
receiver, myself do it from the controller, and for not using any of the
outputs, I use the audio switch voltage that control the repeat audio so it
will be active with appropriate signal at the repeater input.
Hope this info helps.
Juan
Asunto: Re: [Repeater-Builder] Re: TKR-820 PL Control
John P Slusser wrote:
> Thanks. I'm going to try that on the internal PLL unit. If that
> doesn't work I'll acquire an external encoder. I'm going to try to
> link using DPL and use PL for user repeater access. This will be a
> first for me. I was hoping that someone had in-depth experience with
> the Kenwood and might share a method.
>
> John in Tucson
Yahoo! Groups Links
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.408 / Virus Database: 268.13.11/496 - Release Date: 10/24/2006
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
