Yes, I have the PDF manual. Thanks anyway. de WD7F John in Tucson ----- Original Message ----- From: "N9WYS" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Wednesday, October 25, 2006 5:32 PM Subject: RE: [Repeater-Builder] TKR-820 PL Control
John, Do you have the manual for this repeater? (Sorry - I've been only "kinda" following this thread...) If not, I have it in PDF on my ftp server. Let me know if you need access to it and I can set it up for you. E-mail direct to: n9wys <at> ameritech <dot> net Mark - N9WYS -----Original Message----- From: Repeater-Builder@yahoogroups.com On Behalf Of WD7F - John in Tucson Sent: Wednesday, October 25, 2006 2:27 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: TKR-820 PL Control John P Slusser wrote: > Thanks. I'm going to try that on the internal PLL unit. If that > doesn't work I'll acquire an external encoder. I'm going to try to > link using DPL and use PL for user repeater access. This will be a > first for me. I was hoping that someone had in-depth experience with > the Kenwood and might share a method. > > John in Tucson I couldn't tell you which pin it is, but encode tone is available on one of the connectors on the tone panel/controller board in the top of the repeater (the board were the tone EEPROM is located). You should be able to find it with the manual and either interrupt it, or pull it to ground when no tone is desired. Then just bring the control line for that out a spare pin on the molex on the back where everything else plugs in. There is one or two that can be used. -- Jim Barbour WD8CHL Rgr. I opened it up yesterday evening and found the enable on the module responsible for encoding. And that signal originates in the tone panel as you mention. I'm going to test that theory first. Also, I want to see how disabling the PL will effect the squelch heard on a user's radio. I still may elect to use an external encoder if my experiement is not so succssful. Thanks. WD7F John in Tucson Yahoo! Groups Links -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.408 / Virus Database: 268.13.11/496 - Release Date: 10/24/2006 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/