Hi Ralph, Thanks for the info that's what I have been looking for. My station has the P58 version of the controller which I believe is Tone Remote/Repeat controller. The only problem is it has been setup simplex as a tone remote base. How do I remove receiver muting on this controller and will your mod's still work with this setup?
Regards, Bill... -----Original message----- From: "Ralph Hogan" [EMAIL PROTECTED] Date: Wed, 20 Dec 2006 16:19:46 -0800 To: Repeater-Builder@yahoogroups.com Subject: [Spam] RE: [Repeater-Builder] GE Mastr II Station > Hey Bill, > > I pull one of the cable connectors (j1203) plugged into the IDA and insert a > small breakout molex to molex cable to get to the rx & tx audio pathes plus > PTT to feed up to the ham controller. In this way the internal GE rptr > controller can be restored to normal and used in a pinch by removing the > breakout cable. I've documented my version of the GE Master II IDA > conversion on my website. > > http://www.qsl.net/w4xe/rpttech/rpttech21.htm > > Includes a schematic/pictorial of the external ham rptr controller wiring, a > list of IDA connector pinout descriptions and IDA board layout and pot > locations. > > 73's > Ralph W4XE > > > > -----Original Message----- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] Behalf Of Bill > Sent: Tuesday, December 19, 2006 11:24 PM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] GE Mastr II Station > > > Hi! > > Does anyone have repeater conversion info on the newer style GE Mastr > II stations with the all in one controller, metering and speaker > (19B234871). I have a VHF station I wish to convert but I would like > to keep the local station controls, speaker, mic and metering. > > Thanks! > > Bill > N6YMZ > > > >