Bob Dengler wrote: > At 1/9/2007 08:10 AM, you wrote: >> Mathew Quaife wrote: >>> Actually I have several 56 splits. When I ordered the xtal, I >>> ordered for high side injection, and it does not want to tune up real >>> well. Put a 147.78 LSI, and it tunes to better than -110 dBm. So >>> this is the reason I want to try a 66 split and see if it will do any >>> better. >>> >>> Mathew >> How about taking the L.O./multiplier board(s) out of a 66 and swap 'em >> into the 56? >> >> -- >> Jim Barbour >> WD8CHL > > You'd also have to swap the helical assemblies, as the LO coils are different. > > Bob NO6B
Yup-that's right, I forgot about that. The whole reason I mentioned that was to have the low split front end with the LO that works well for high side injection... :c/ -- Jim Barbour WD8CHL