This thread is now a web article:
<http://www.repeater-builder.com/construction-proj/no6b-crystal-heater.html>
Kevin Custer
Bob Dengler wrote:
At 1/11/2007 06:48 AM, you wrote:
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII
The 1/4 watt heater resistor & LM34 temperature sensor are mounted on the
same side of the crystal but separated as far apart as possible.
I forgot to mention that thermally conductive epoxy was used to mount the
LM34 & 51 ohm 1/4 watt heater resistor onto the crystal.
Bob NO6B
