There's a safety note on the GE ferroresonant supply plus
some info on fuse sizes here:
<http://www.repeater-builder.com/ge/mastr2/m2-arcing.html>
Mike WA6ILQ
At 01:32 PM 02/05/07, you wrote:
Master II Base Station / Repeater Power Supplies come in four flavors.
The most important information is: Two are fused at 15 Amps, and
two are fused at 35 amps.
If you have the high current model, it has a BUSS NON-35 AMP
one-time FUSE (Class K5), and is 3 inches long.
The 15 Amp fuse is a NON-15 (obviously), and is considerably smaller
in size, and is 2 inches in length.
It will be obvious when you look at the fuse holder / fuse. I could
look up some model numbers, but this information will tell you if
you have the smaller power supply in a BIG BOY application.
Bill Hudson
W6CBS
Subject: RE: [Repeater-Builder] Mastr II Station Power Supply Problem?
> I'm setting up a Mastr II VHF station for a 2 meter repeater
> and when I
> got to the power amp to check everything I can only get about
> 86 watts . . .
