Hi Skipp, Wilco. I'll contact you off-list.
73, Bob -----Original Message----- From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sun, 22 Apr 2007 9:35 PM Subject: [Repeater-Builder] Re: REPCO 2 watt vhf transmitter strip- info request Re: REPCO 2 watt vhf transmitter strip- info request Bob..! you "nice guy" you! I've also been looking for the VHF Manual for some time. I'd pay you some type of a big bribe to make copies for me/us. I will of course scan them into a pdf file (if not received as scans) and pass copies into to Mike and anyone who asks for free. I already have the UHF/900 RDL Manual scanned (copes in pdf format available free to anyone) and would really... really like to get my hands on a copy of the VHF Manual/information. So... is is possible to bribe you for a copy of at least the VHF Manual? Skipp skipp025 at yahoo.com > [EMAIL PROTECTED] wrote: > Hi Art, > > Have you found the data you were looking for? If not, I might be able to > help. I found manuals for both the VHF and UHF Repco receivers and transmitters > in the S-COM archives. They're referred to as the RDL series of RF Link > Devices, and apparently there were both voice and data versions. We had some of > the data-only TX strips years ago, so W0INK designed a > pre-emphasis/limiting/filtering circuit to use them for voice operation. > > The manuals are copies of copies and are a little rough in spots. > > Mike/ILQ: Interested in posting them on Repeater-Builder? > > 73, > Bob > > Bob Schmid, WA9FBO, Member > S-COM, LLC > PO Box 1546 > LaPorte CO 80535-1546 > 970-416-6505 voice > 970-419-3222 fax > www.scomcontrollers.com > > In a message dated 4/18/2007 1:57:38 PM Mountain Daylight Time, > [EMAIL PROTECTED] writes: > > Recently a member posted some info about this 2 watt vhf board being > available on Ebay. I obtained 8 of these boards for experimentation. > They are marked RD*3HT**X date of 2-83 and appear new and unused. > Indicated tested at 154.570 (no crystal installed). Wondering if > anyone might have some documetation or scematic or pinout that might > help in putting this board into an amateur radio project. Would gladly > share experience with this board with anyone. The board is high > quality and may be ideal in a small size vhf project. Thanks in > advance. Can contact off list at [EMAIL PROTECTED] > (mailto:[EMAIL PROTECTED]) . Art Carlson > > > > > > > > > ************************************** See what's free at http://www.aol.com. > ________________________________________________________________________ AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com. =0
