Hello to the group, I've been watching this post (below) on Motorola-User and have seen no replies. Perhaps it's too early in the game (date/time) to see some.
I'm also interested in the Quantars and want to gain some knowledge with this system. In looking at the repeater-builder website, Kevin has asked for some articles converting the Quantars into the ham bands with controller agility. I've only seen one previous post on someone tackling the Quantar system and taking it down to the ham bands. So, I'm cross-posting this article into repeater-builder. Any of the users have either general or specific knowledge on converting the Quantars that they would like to share with the rest of the group? Thanks, Don, KD9PT ----- Original Message ----- From: "copfromjersey" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, June 27, 2007 12:10 PM Subject: [Motorola-User] quantar pinouts > Hello All, > > I have plans to interface a Quantar to an external controller. I > understand that the Quantar has to be placed into base station mode to > accept a four wire control from the external controller. Does anyone > have the pinouts for the Quantar so that I can physically interface > the controller. Pinouts for PTT, TX Audio, RX audio, Gnd, PL Detect > and such. Any help would be appreciated. > > Thanks Everyone > > > Eric > > > > Sponsored by "RBTIP" > Yahoo! Groups Links > > > > > !DSPAM:1016,4682bdb4390671680728247! > >
