See if the screw in side connecting pin on the TEE is loose - glad you found it. I have had a type N tee with a loose connection where the side pin screws into the other pin. sb
Keith, KB7M wrote: > Just an update on the status of this project. I thought what I've > found might be interesting to the group. > > At the suggestion of a group member, I removed the top and side ports > to the cavity. It turns out that this is quite easy to do. You just > remove the three screws holding the top port, and the nut holding the > side port. At this point the whole assembly lifts out easily. I > inspected the assembly and could see no problems. I resoldered the
