Didn't see anything on the Relm site, but in reading the previous posts on the PSC 1422 I noticed that I have the same combonation of PS, Rptr. and PA. I'm familiar with the Regency U10 10w and U15 15w rptrs. so again I am assuming that the U01 is a 1w output and the ACU45 PA is approx. 45w to 50w output. But if there is any one that has any info on this combination of components I would appreciate them sharing it with the group. -- Doug N3DAB/WPRX486/WPJL709
---- Eric Lemmon <[EMAIL PROTECTED]> wrote: ============= Doug, Wilson and Regency products are now serviced by RELM/BK. Go here for their home page: <www.relmwireless.com> Most outsourced power supplies used in the two-way radio industry are made by Astron, Duracomm, or Samlex. Perhaps RELM can provide more information. Also, Steve Bosshard, NU5D, posted a message some time ago about picking up a couple of PSC-1422 power supplies at a hamfest. Perhaps Steve can help. Steve? 73, Eric Lemmon WB6FLY -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of n3dab Sent: Friday, November 30, 2007 9:34 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Wilson PSC-1422 Power Supply Does anyone have any information on a Wilson PSC-1422 power supply ? This is a rack mount un metered unit and has the "Astron" name stamped on all (3) of the SCR's. I am curious about the max. and continuous duty rating for this unit. and amybe a schematic of it if it varies very much from a similar sized Astron PS. I'm guessing it 22-25 Amps max. and 14-15 Amps continuous. Does this sound right ? Thanks Doug N3DAB