Let me further clarify the previous. When I turn Remote Base Xmt ON, I'm expecting the "Remote Base Tail Beep" to go from 500Hz (Xmt OFF) to 1Khz (Xmt on). That never happens, thus I believe that the xmt is never coming on, so the PTT transister never gets the drive from the CPU.
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote: > > Did you check the logic level driving the PTT transistor ? > Does it change ? > > > -------------- Original message ---------------------- > From: "raritansailor" <[EMAIL PROTECTED]> > > Hi Folks, > > > > I have an MCC RC-100 that I've been using for the MADXRA 147.345 > > Repeater, here on the Panhandle of WV. Has been working just fine. > > > > We decided to add a remote base in order to link this repeater into a > > regional network. Everything hooked up fine, everything works fine, > > EXCEPT.... I can't seem to get Remote Base Xmit to turn on! Therefore > > no PTT to the link Xcvr. > > > > I've programmed the 4066 * code 25 times and whenever I use it, no xmit > > on! So as it stands I can turn remote base ON, get the 500Hz remote > > base tone, the Link Xcvr audio is being passed from the network to the > > 147.345 system, but you can't connect from the 147.345 repeater to the > > network cuz the "Xmit on", won't turn on, and the Link Xcvr gets no PTT. > > > > Any ideas folks? I DO program the 4066 * code with 0X where X is a "not > > restricted" single digit. I've tried several different digits. (as a > > side note ny * codes for "force ID", and "Remote base OFF" work just > > fine!). When I program the 4066 * code I DO get the RR in response. > > > > What am I missing? Anyone able to lend a suggestion? > > > > Thanks! > > > > Mike, N3EAQ > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > >
