The label says 136-174Mhz And was set to 153.92. 10-20W In=200-250W Out. [EMAIL PROTECTED] (Fuse is 40A) 120VAC for cooling fan only P/N PA3-1FF and hand etched the letters "RF"
It appears to be similar to the other PA3's according to manuals found on Repeater-Builder Website but with more power. I want to use it as A 2 Meter HAM Linear. I was thinking that will not work since the output freq is set regardless of the input freq. Thanks again, Bruce (Give me a few weeks on the CallSign!) (Tech Test 2-30-08. Should pass easily) (The ARRL study book covers everything I need!) >many of these are strip tuned and cannot be retuned easily. On the other hand >they are sometimes quite broadband also. If you want to use it on 2 meters it >may work on the top end of the band with maybe only a small loss in output. >Quoting pooterwizz <[EMAIL PROTECTED]>: > I am taking care of an estate for the Widow. I have a TPL PA3-1FF(RF) > Repeater Amp. > It has connections for both 13.8VDC and 120AC for the cooling fan. It > has a label factory adjusted to 153.92. > > Question, how does one change the output freq? The manuals on this > site do not cover this model. > I can use it if I can change the freq. If not, does anyone need this > and the 153.92 freq?
