John, General setup, I'm not directly familure with this unit.
The Icom needs to operate as a full duplex base radio instead of as a repeater. The internal controller will most likely not be used, unless it can provide an ID function. This might be done via programming or a switch (Rpt/Local). Bring the audio and COS from the Icom receiver to the Doug Hall voter. Take the audio output of the voter and PTT and feed to the Icom transmitter. Good Luck Milton Engle N3LTQ M&D Technical Services, LLC ----- Original Message ----- From: "John" <99-1nwecs.org2@> To: <Repeater-Builder@yahoogroups.com> Sent: Tuesday, March 11, 2008 4:27 PM Subject: [Repeater-Builder] ICOM FR-3000 / FR-4000 repeater >I have an Icom FR-3000 repeater in use. I would like to add a Doug Hall > signal to noise voter. I am not sure how to interface the voter into > the repeater. I have COR and audio coming from my other receivers into > the voter. My question is how to break out the receiver from the > repeater, send it out to the voter, and send the voted signal back into > the repeater activating the repeater controller & transmitter? Can this > be done using the internal repeater controller of the Icom? Should I > use an external controller? I have the Icom instruction manual. It > gives some pin-out information but doesn't seem to have what I am > looking for. Is there a detailed service manual for these? Does someone > have a copy they can send me? I tried contacting Icom but the systems > people were not available to offer any assistance. > > Thanks in advance, > John Liguori > Sparta Twp NJ > > > > > > > Yahoo! Groups Links > > >
