Bob, I need option cards but, at I don't have a Micor manual as yet, I can only give you the description printed on the card tray. If you have an email that I can send the list to, email me at tallinson2 <at> yahooo <dot> comm. $5.00 each as is is fine with me. Tom
--- In Repeater-Builder@yahoogroups.com, "bbfmrf" <[EMAIL PROTECTED]> wrote: > > I have a number of UHF Micor repeaters that I wish to move. I have > tried selling them as a whole, but response was not positive, (mainly > due to shipping expense), so here is the new deal: > > I will dismantle and sell ANY item on the repeater for $5 EACH, (Only > exception is the Low Power Amp, for which I request $10) plus > shipping. (If multiple items are purchased, there will only be the > one shipping charge for all items included in the package). > > I will stand firm at $5 each just to simplify matters. Cards will be > included in this offer. I have too many to list, so if you are > looking for something, please send a request and preferably a part # > and I will respond w/ the closest match I can find. > > (FYI, I have a LOT of cards from MSY repeaters and am not aware of > the differences, but if you want or can use any of those, the price > will be $2.00 per card for the MSY stuff) > > All items are sold AS IS, (Caveat Emptor). Again I believe all items > to be useable, but I have no way of testing. IF there is an item w/ a > problem I WILL work w/ you to replace it as best I can, but there are > no guarantees. > > When requesting any items, please be as descriptive as possible and > if you can / want to include a picture of the item you want that > would be helpful. My experience w/ Micors is limited and this will > be somewhat of a learning experience for me. > > I do not have the time, materials or specific knowledge of these > items to test them in advance, however I can send pictures of the > actual items before shipping for a visual approval. > > I am not a Motorola expert and I am not a HAM, so I cannot provide > information as to the operating capabilities of these units. I can > provide specific model information and you may research with others > that are familiar with this equipment. > > All equipment will be shipped from the Chicago area, based upon ZIP > code 60527 > > Buyers will pay actual shipping costs, which in some cases will > include a few additional dollars to cover the cost of the shipping > materials. (boxes, packing material etc) > > Pick up and inspection is available on an appointment basis. If you > want to go as far and bring test equipment, feel free. > > First Come First Served and Thank You for your Interest. > > Bob >