At 5/6/2008 19:39, you wrote: > > Yes, this would be the obvious hard part. My immediate interest is to > > "decode" the data stream & establish the protocol coming out of the > > controller. Once that's done, each radio's control format can be > > individually addressed. > >It's documented in several places. Here's comments from my code that >has the essentials:
Woohoo, the Doug Hall "Rosetta Stone"! Thanks, Skip. One question: >Byte lsb bit of byte 1 shifted in first OK, but then the rest of the bytes are listed MSB first: >Byte 2: B7 - TX power, 1 = on >B6 - RX power, 1 = on >B5, B4 - Tx power: Are the other bytes reversed (MSB clocked in first), or are all bytes LSB first? Bob NO6B