Hi, A new version of SvxLink has been released. We use this software as a repeater controller at SK3GW. ( http://sk3w.se/ )
If you are not familiar with this software, it is a full-featured Repeater Controller including Voting and Remote TX and RX:s via Internet. You need a Computer with aprox 400MHZ CPU and a sound card. One Sound card is good for two RX, (right and left channel), more RX's just add another soundcard. PTT from serial port, and COR in via serial port. It has different squelch types, like hardware COR, CTCSS, VOX or signal level. SvxLink is under ACTIVE development and is FREE. http://svxlink.sf.net Check the featurelist: http://svxlink.sourceforge.net/featurelist.php 73 de Gunnar, SG3P Hello SvxLinkers! A new fresh version of SvxLink, 080518, has now been released. The biggest change is internal. Big parts of the audio handling subsystem has been rewritten. This has made it possible to implement a couple of new features and it will be easier to implement new features in the future. Qtel does not change very often but this time I got a patch from Stuart Longland which adds VOX functionality. At the moment it only works if full duplex is enabled under the sound card settings tab. Some of the most important changes in the SvxLink Server are: * Implemented remote TX. The new application "remotetrx" now handle both remote transmitters and receivers. The old application "remoterx" has been removed. * Now possible to use left/right stereo channels as two mono channels. Which channel to use is chosen by the new configuration variable AUDIO_CHANNEL that must be set for RX and TX configuration sections. * Added a signal level based squelch type. Set SQL_DET to SIGLEV to use the new squelch type. Configuration variables SIGLEV_OPEN_THRESH and SIGLEV_CLOSE_THRESH will control at which levels the squelch will open and close. To use this squelch type, the signal level detector must have been calibrated by setting up SIGLEV_SLOPE and SIGLEV_OFFSET. Also, since the detector is not perfect you probably need to set SQL_HANGTIME to a couple of hundred milliseconds. If using a voter, SQL_DELAY might have to be setup to get reliable signal level readings. A value of 40 seem to work fine. * Macros behave a little bit different now. The macro digits are now sent back into the logic core, digit by digit, as though they were received from the DTMF decoder. This mean that all macro commands have to be ended with a number sign to be executed. Make sure you read the ChangeLog (really) for all the details. http://sourceforge.net/project/shownotes.php?release_id=600206 Enjoy the new release! 73's de SM0SVX / Tobias ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Svxlink-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/svxlink-devel
