n9wys wrote: > Well, Joe - I got it to work! > > What I ended up doing was chasing the audio path from the "goes-inna" > through the backplane. I found that on the Squelch Gate card, it was not > being passed, even though the jumper was in place. I added a hard-wire > jumper to the backplane between Pins 11 and 24, and "VOILA!" > > The next thing I need to do is figure out why I cannot defeat PL > operation... when I switch the Station Control to PL DISABLE, the station > still transmits. In fact, it transmits even when the LINE DISABLE is > switched on, too. More jumpers, I fear.
It's not supposed to. It doesn't say 'Transmit Disable'. Line Disable will disable any DC or Tone remote. PL just opens the local speaker to carrier squelch.
