Sounds like the 72 MHz RX option for the PURC 5000 series radio. A seperate manual as I recall. Try Moto parts ID for more info.
Milt N3LTQ ----- Original Message ----- From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Sunday, September 21, 2008 1:35 PM Subject: [Repeater-Builder] Motorola MICOR Receiver enclosure questions >I recently picked up a 72-MHz MICOR receiver off of the big auction site >(won't mention the name lest someone get all [EMAIL PROTECTED]&!).. This MICOR >receiver appears to be in a 3-1/2" high MSF-5000 series box, with the >spring-loaded releases on the black front panel. It has a squelch control >and an RJ-series jack on the front panel, and the rear panel has a BNC >antenna jack, along with a 10-pin male plug. The Motorola P/N stamped on >the rear is TRC1072AB, which might be just something like the rear panel >number and not the complete assembly number. > > Does anyone know what series station this receiver was used in? I'd like > to find the hookup info for it, and find a part number the 10-pin matching > connector. I have plenty of actual MICOR receiver info, for receivers of > all bands, and would like to use this as a UHF control receiver for a > 2-Meter repeater. Repeated request for info emails to the original seller > have not been responded to, so I"m trying here. One person in our shop > felt it might be part of an MSF-5000 sereis paging station, with this > 72-MHZ receiver used for control (maybe similar to a 330W MICOR PURC > station on 42 MHz with its 72-MHz receiver, which I have sitting in my > garage.) > Larry > > > ------------------------------------ > > > > Yahoo! Groups Links > > >