Thanks I will check that out and get back to you. Thanks Bob kd7ikz ----- Original Message ----- From: Bob M. To: [email protected] Sent: Saturday, September 27, 2008 4:14 AM Subject: Re: [Repeater-Builder] MSF 5000 Part
I think it's a standard Molex or Amp connector. You might be able to buy it from Mouser or Digikey. I can get the Motorola part numbers for the cable end but you will pay less elsewhere (unless it's a custom part). I can get you the wiring for it, but I'd guess the center pin is ground and the two outer pins feed the transformer. That should be easy to figure out. It would be far easier to just snip the connector off and splice an ordinary AC line cord to the wires, especially if you have no plans to ever install the supply into a real MSF station and just want to use it stand-alone. Bob M. ====== --- On Fri, 9/26/08, Bob Luttrull <[EMAIL PROTECTED]> wrote: > From: Bob Luttrull <[EMAIL PROTECTED]> > Subject: [Repeater-Builder] MSF 5000 Part > To: [email protected] > Date: Friday, September 26, 2008, 10:56 PM > Hi All > I am looking for the AC power box with the lead to the > power supply > for the MSF 5000 case. I have a TPN1185A I would like to > get up and > working. Can anyone help? > Bob > kd7ikz
