I spent the weekend working on a set of DB4060 cans (cleaning and retuning) and have managed to commit the ultimate stupidity. I had all the harnesses off and instead of MARKING them I just laid them out on the bench. Unfortunately, the bench got 'cleaned' and the cables are now all mixed up.
I can tell which 2 cables went between the cans and which went to the T-connector, but all 4-cables are different lengths. I assume that the shorter of the two cables go on the TX (high) side of the cans and the shorter go on the RX (low) side of the cans. Am I correct? Thanks for the help. next time I'll mark the cables! 73, Mike WM4B