Hi Savy, Specific to the TK-760g and TK-860g mobile only:
Buy the Kenwood KCT-19 option cable and install it per the service manual (just plug it in properly). I stock them if you can't find one local to you. For the Kenwood TK-860g Radio KCT-19 Pin 4 Receiver Audio Input KCT-19 Pin 5 Transmit Audio Out KCT-19 Pin 6 Ground KCT-19 Pin 7 Switched +VDC KCT-19 Pin 8 Transmitter PTT Out KCT-19 Pin 11 COR KCT-19 Pin 15 ON Air Detect If you require the TK-860g CTCSS/DCS decode, remove the grey wire of the KCT-19 CN4 (connector inside the radio) and jumper the wire to the side of R103 that is connected to Pin 7 of IC9. See the TK-860g Service Manuals for details on the part location(s). In the Kenwood KPG-59D programming software, select the Edit, Optional Features menu an set Data TX with QT/DQT=Yes. I have the programming sheet for the TKR-750 and TKR-850 repeater port but I can't attach it to this post so please Email me direct and I'll send it to you... a freebie of course. cheers, skipp skipp025 at yahoo.com www.radiowrench.com > Saviour Otsemobor <[EMAIL PROTECTED]> wrote: > hello All, > pls can anybody help me on how to connect a link radio, > precisely the tk860g series radio to a tkr850 repeater.? > thanks > regards > savy >