Sounds to me like the cans are tuned backwards, meaning, you are trying to pass low/notch high on the pass high/notch low sides.
________________________________ From: electrician2000 <[EMAIL PROTECTED]> To: Repeater-Builder@yahoogroups.com Sent: Sunday, October 26, 2008 2:38:59 PM Subject: [Repeater-Builder] Telewave BrBp Problems Hello all, I recently came into the chance to acquire a 2Meter repeater coordination and jumped at the chance. I have used some new and old equipment for the job. Where my problem starts is with the duplexes. When field tuned I have no receive signal when the transmitter kicks in. We tested the cans, upon doing so I notice a problem on the receive side. Tuning them I would put 10watts in and get 10watts out on the receive frequency. Then I switch the radio over to the transmit frequency and I have 10 out of 10 going through when tuned for the receive frequency. I am at a total lost as to what I need to do to solve this problem. It seems that the cans are not cutting out the frequency as they are designed. More info on the cans: Telewave 2 Meter, 4 Cavity, TPRD 1554. Thanks KC9JOY