What do you have cabled to the port ?
At 01:40 AM 01/30/09, you wrote:
Hi,
This is a 'normal' feature of the 210. It has no influence on any
operation. Seems to affect port 1 only.
73 de Doug - GM7SVK
--- In
<mailto:Repeater-Builder%40yahoogroups.com>Repeater-Builder@yahoogroups.com,
DCFluX <dcf...@...> wrote:
>
> Try a diode between the PTT line and the repeater.
>
> On Thu, Jan 22, 2009 at 8:06 PM, Glenn Maclean <wa7...@...> wrote:
> > I am putting a 220 repeater together using an ICOM IC-RPP2210. The
> > repeater is working except the PTT LED remains illuminated all
the time.
> > It goes ever so slightly brighter when the repeater is keyed up. I
> > measure 1.56 volts dc at the PTT line between the controller and
> > repeater un-keyed. I measure .67 volts dc when the repeater is
keyed up.
> > I have tried applying 12 volts to a 10k ohm resistor with the
other end
> > connected to the PTT line with no change. The PTT LED remains on.
I even
> > tried a 1K resistor in the same configuration. The PTT LED
remains on.
> > The repeater is transmitting and receiving just fine with the
RC210
> > controller.
> >
> > Any suggestions?
> >
> > Thanks,
> > Glenn
> >
> > ------------------------------------
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
