Your right, back to drawing board, thanks, Bernie
----- Original Message -----
From: Chuck Kelsey
To: Repeater-Builder@yahoogroups.com
Sent: Thu, 19 Feb 2009 14:27:01 -0500 (EST)
Subject: Re: [Repeater-Builder] Ge Mastr ii base antenna relay
Maybe we are talking about two different things.
Are you talking about an external relay, or the relay that is soldered to the
PA
low pass filter board?
The relay on the PA low pass filter board has
two jacks next to it. One connects to the antenna, the other to the receiver.
The PA is connected via a PCB trace.
Chuck
WB2EDV
----- Original Message -----
From:
BERNARD
GNAT
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 19, 2009 2:18
PM
Subject: Re: [Repeater-Builder] Ge Mastr
ii base antenna relay
With no power to relay, the ant. would go to the Rx. If I take
the Rx cable off and replace it with the amp cable, the amp should go right
to
the ant.
----- Original Message -----
From: Chuck Kelsey
To: Repeater-Builder@yahoogroups.com
Sent:
Thu, 19 Feb 2009 14:02:15 -0500 (EST)
Subject: Re: [Repeater-Builder]
Ge Mastr ii base antenna
relay
No, your transmitter won't be connected to anything. At least if I'm
understanding your
question.
Chuck
WB2EDV
-----
Original Message -----
From: "wa8ili" <fixi...@embarqmail.com>
To: <Repeater-Builder@yahoogroups.com>
Sent:
Thursday, February 19, 2009 1:50 PM
Subject: [Repeater-Builder] Ge
Mastr ii base antenna relay
>I have looked at the
article dealing with the antenna relay while
> converting a base
amp to a repeater amp, 4 options are given. I was
> wondering if
just unplugging the Rx cable and plugging in the amp cable
>
into the Rx jack and disconnecting the antenna relay coil would
be
> accepable. This could be option #5? Thanks,
Bernie
>
>
>
>
------------------------------------
>
>
>
>
Yahoo! Groups
Links
>
>
>
