Version 5 is "out there" on some web sites. It might be worth trying to find it. Then things will line up.
Bob M. ====== --- On Wed, 3/25/09, Robert Kafarski <radiotwo1...@yahoo.com> wrote: From: Robert Kafarski <radiotwo1...@yahoo.com> Subject: Re: [Repeater-Builder] MARATRAC To: Repeater-Builder@yahoogroups.com Date: Wednesday, March 25, 2009, 3:16 PM HI BOB! NO VERISON 4.03 THE HEX EDITOR IS INTEL BYTE ORDER.....THANKS BOB --- On Wed, 3/25/09, Bob M. <msf5kg...@yahoo.com> wrote: From: Bob M. <msf5kg...@yahoo.com> Subject: Re: [Repeater-Builder] MARATRAC To: Repeater-Builder@yahoogroups.com Date: Wednesday, March 25, 2009, 2:32 PM Are you working with the same RSS version: R05.00.00g dated 20-Dec-96? Do you have your hex editor set to INTEL byte-order (little Endian)? Unfortunately you can't just replace one value with another throughout the entire file, as not all locations with a specific value need to be changed. Bob M. ====== --- On Wed, 3/25/09, Robert Kafarski <radiotwo1955@ yahoo.com> wrote: From: Robert Kafarski <radiotwo1955@ yahoo.com> Subject: Re: [Repeater-Builder] MARATRAC To: Repeater-Builder@ yahoogroups. com Date: Wednesday, March 25, 2009, 2:16 PM HI BOB! NOTHING CLOSE TO WHAT I SEE ON REPEATER BUILDER. THANKS BOB --- On Wed, 3/25/09, Bob M. <msf5kg...@yahoo. com> wrote: From: Bob M. <msf5kg...@yahoo. com> Subject: Re: [Repeater-Builder] MARATRAC To: Repeater-Builder@ yahoogroups. com Date: Wednesday, March 25, 2009, 10:54 AM If the locations don't match, search for the original data values. They'll probably be very close to the locations in the article, or offset by some fixed amount that will be consistent for the other addresses too. Unless of course someone already hex-edited the version you have, in which case the values won't be the same no matter what you do. Bob M. ====== --- On Wed, 3/25/09, Robert Kafarski <radiotwo1955@ yahoo.com> wrote: From: Robert Kafarski <radiotwo1955@ yahoo.com> Subject: Re: [Repeater-Builder] MARATRAC To: Repeater-Builder@ yahoogroups. com Date: Wednesday, March 25, 2009, 7:52 AM HI MIKE. I TRIED THE INFO ON REPEATER BUILDER. THE HEX ADDRESS DOES NOT MACH UP. ..73 BOB --- On Tue, 3/24/09, Mike Morris WA6ILQ <wa6...@gmail. com> wrote: From: Mike Morris WA6ILQ <wa6...@gmail. com> Subject: Re: [Repeater-Builder] MARATRAC To: Repeater-Builder@ yahoogroups. com Date: Tuesday, March 24, 2009, 3:51 PM At 04:45 AM 03/24/09, you wrote: >HELLO GROUP! ANY BODY OUT THERE THAT CAN HELP ME WITH PROGRAMMING A >MARATRAC TO SIX METERS? THANKS BOB See <http://www.repeater -builder. com/motorola/ maratrac/ maratrac. html> especially the section on the 6m conversion. Mike WA6ILQ