I recently acquired a Motorola Micor Compacta Station repeater. This repeater
was converted and set up for 147.105 / 146.705 using a CAT controller. I
purchased this repeater without the controller but purchased a new NHRC-5
controller to use with this. The problem I have is I cannot get any audio out
from the hand mic. I have the shield and PTT correct but am unsure of the
placement for the audio wire. While keying the mic it activates the PTT in the
controller but when talking into the mic there is no audio coming thru the
repeater. I have tried a number of different connections with no success. Any
assistance is greatly appreciated.
Ron/N4SFU
