Joe, Who manufactured them? Amp and King usually included instructions (at least in our MILSPEC packing anyhow), but for bulk orders they may not. Check the manufacturers website... my experience is that different companies use slightly different measurements, which is why we always used Amp/King (which used the same measurements).
Good luck. Mike WM4B > -----Original Message----- > From: Repeater-Builder@yahoogroups.com [mailto:Repeater- > buil...@yahoogroups.com] On Behalf Of Joe > Sent: Monday, July 20, 2009 9:05 PM > To: Repeater-Builder@yahoogroups.com > Subject: Re: [Repeater-Builder] Re: crimping vs soldering & types of > coax connectors > > Here's a question: Where do you get the cable preparation for the > crimp-on connectors. Connectors that we have ordered from Tessco, etc, > come in a bag but with no installation instructions. > > Joe > > > Mike Besemer (WM4B) wrote: > > Absolutely. The words 'properly installed' are key! > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >
