There is information available to move them to 902-927 if they are 900 Mastr II GeNet900 stations.. It requires assembling a pll loader pcb to load the pll code to make it work on 902/927 instead of commercial.
There is little use commercially for it but some limited amateur interest... the problem is one Master Osc.. feeds 10 stations :-) A 10 channel trunk on 902/927 would be amusing but largely not practical :-) I have limited interest as I do have the code written to move to amateur... but shipping would exceed practical $$ for them... While that system probably cost $200000.00 new.. it is maybe worth one percent of that today unless you can find a commercial interested party. Doug KD8B At 12:40 PM 9/3/2009, you wrote: > > >I have "Inherited" a 10 Channel GE MASTR II repeater system, and I >am looking for some info or maybe even some interest. > >The COMB # is S4VTRY0756 > >There are 5 cabinets each w/ 2 repeaters. (1) of the cabinets also >has a Master Oscillator. > >There also appears to be a separate controller on each repeater with >a part # of 19D90186803 > >Each cabinet has a large top mounted fan and each repeater has its >own power supply. > >I have never been a GE person, so I have no knowledge as to exacly >what I have here. > >Odds are that I would prefer to sell it off as I really don't need it. > >If anyone can help identify this system and if there is any interest >in it I will accept offers. I would prefer to sell it as one >complete package, but if there is not any interest, I will entertain >selling it in pieces. > >I thank you in advance for info you can provide. > >If anyone needs further info or has specific questions, feel free to >drop me a line and I'll look at the system and to provide whatever >data you need. > >Feel free to email me offline at <mailto:bbfmrf%40yahoo.com>[email protected] > >
