Mike, please contact me directly at wb9...@sbcglobal.net thanks  Rick/rjb

--- On Sun, 9/13/09, Mike Morris WA6ILQ <wa6...@gmail.com> wrote:


From: Mike Morris WA6ILQ <wa6...@gmail.com>
Subject: Re: [Repeater-Builder] msf5000 microphone
To: Repeater-Builder@yahoogroups.com
Date: Sunday, September 13, 2009, 12:21 AM


  



At 06:09 PM 09/12/09, you wrote:
>what microphone will work with msf5000?

See <http://www.repeater -builder. com/motorola/ msf/msf-index. html>
and look for the paragraph that starts with "The HMN1001B microphone"

But are you sure you want a microphone? The MSF has no speaker
and as such was designed to use a test handset. Using a microphone
gives you no way to monitor the receiver.

Since the MSF has a 6-wire headset / microphone / programming jack you
can use a workaround to use a more common (and hence cheaper) Maxtrac
microphone.

I've seen a test jig made up of a 6-wire phone cord feeding a 8-pin Ethernet
style jack that was wired to match the Maxtrac mic. The pinout for that
microphone is here:
<http://www.repeater -builder. com/maxtrac/ maxtrac-index. html>

The 8-pin baseboard style jack housing also had a DB-25 pigtail hanging
out of it that connected to the RIB box for programming the station.
See this article for info on the programming cable pinout:
<http://www.repeater -builder. com/motorola/ msf/msf-prog- cable.html>

The 8-pin baseboard style jack also had enough room in the housing for
a 1/8 inch headphone jack, and you could plug a Radio Shack Model
277-1008 Mini Audio Amplifier (about $20) into it.

Or instead of the Radio Shack amplified speaker you can build your own
by taking a common mobile speaker and adding this circuit inside the
housing: <http://www.repeater -builder. com/rbtip/ audioamp. html>.

If you used a volume control with a switch on it you could switch off the
DC power to the speaker amplifier when you weren't at the station. Then
cable the amplified speaker into the drawer; connect the audio input to the
audio pins on the 6-pin cable, pick up +12vDC for the amplifier from 
any of several
places in the drawer and have a full time speaker.

Mike WA6ILQ














Reply via email to