I had to tune the 1st band pass and the second band pass. I did not know about the metal soldered cover that needs removed to allow tunning. I have about 019 watts on a 1 watt scale out the exciter . Thanks for the info .
--- In Repeater-Builder@yahoogroups.com, Captainlance <captainla...@...> wrote: > > no mods required, other than tuning. I have 2 on 441, both pout out rated > power. check the regulated 12 volts to the tripler, the molex plugs on the > interface board tend to be intermittent and /or resistive... > the exciter board should be making about 350mw to 500 mw..if working > correctly. > lance n2HBA > ----- Original Message ----- > From: w7nikw7nik > To: Repeater-Builder@yahoogroups.com > Sent: Wednesday, September 16, 2009 10:30 PM > Subject: [Repeater-Builder] Micor Station question > > > I have a micor station 450-470 . I have .019 watts out the exciter after > the 1st band pass tfd6373a. The tripler needs modified. The test meter 5 > output is 34ma. Where can I find the mods for the tfe6153a tripler? > The transmit freq is 441.850, I tried 445.550 element 1 watt with out > tunning . I have narrowed it down to the tripler . Should I add some more > wire to the turns on the 2nd band pass ?? Any help would be great . > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.409 / Virus Database: 270.13.101/2376 - Release Date: 09/16/09 > 11:21:00 >