Hi Everyone, Without the benefit of a spectrum analyzer, I would like to find out how much rejection of out-of-band signals can be expected from a typical UHF duplexer. Have a MSF5000 on 452 that works fine with the T4084 duplexers (1500 style), but have a lot of VHF data and FM broadcast hash that is trying to make it in (the 45kW FM is about 400 yards away and the VHF data is almost 1/3 harmonic). Looking at the documentation, I can guess its about 20db per cavity (or can), but the graphs don't extend very far. So for a regular four-can duplexer I might be providing 40db of protection. I want to increase this, and plan on adding one or two more cans on the receive side, and a Sinclair preselector in-between the latter two to make up for the increased insertion loss.
Just wondering if anyone ever tried/measured this, or had ideas about filtering out FM broadcast. Eric mentioned using a single 7" Sinclair cavity, but I'd like to see if I can use some spare 1500 bandpass/reject cavities first. I don't think a 1/4-wave stub will work with that much field strength prying open the MSF's front-end. Thanks, Tony