Hello Jim,
The right way to look the connector is from the back of the radio, and the pinout for J3 is 5,4,3,2,and1 (Pin 5 is close from 12 Volts power connector and 1 to the outside of the radio) Top of radio ///////////////////////// / 5 4 3 2 1 / ///////////////////////// Batlabs give the pinout with schematic diagram and Repeater Builder give the pinout with Masked Logic Board Circuit Board, 2 different pages on the service manual. 73 Eric VE2VXT _____ De : [email protected] [mailto:[email protected]] De la part de James Envoyé : 20 décembre 2009 11:57 À : [email protected] Objet : [Repeater-Builder] Maxtrac five pin Connector On batlabs http://www.batlabs. <http://www.batlabs.com/images/maxacc2.gif> com/images/maxacc2.gif it shows the five pin connector with pin one towards edge of radio and numbers going 1,4,2,3,5. On Repeater Builder http://www.repeater <http://www.repeater-builder.com/maxtrac/maxtrac-option-plug.html> -builder.com/maxtrac/maxtrac-option-plug.html it shows number one pin towards the outside of the radio and the pins going 1,2,3,4,5. Has anyone notices the difference and know why BatLabs has it that way? Thanks in advance. JIM KA2AJH __________ Information from ESET NOD32 Antivirus, version of virus signature database 4704 (20091220) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
