In case you don't have this: http://www.midians.com/pdf/tone_signaling.pdf
Chuck WB2EDV ----- Original Message ----- From: Tim Ahrens To: Repeater-Builder@yahoogroups.com Sent: Sunday, April 25, 2010 5:47 PM Subject: Re: [Repeater-Builder] QCII Tone Intervals thanks Chuck, that's what I thought, but wanted to be sure. Tim Chuck Kelsey wrote: No interdigit time, at least in most systems. Chuck WB2EDV ----- Original Message ----- From: "tahrens301" <tahr...@swtexas.net> To: <Repeater-Builder@yahoogroups.com> Sent: Sunday, April 25, 2010 4:57 PM Subject: [Repeater-Builder] QCII Tone Intervals > Hi Folks, > > I thought I remembered the timing, but I've slept since > then. > In A-B signaling, the A tone was 1 second, the B > tone was 3 seconds, but what was the A/B interval? > > (most around here use a 2 second B tone). > > What is the dead time between the tones? (if any) > > Thanks, > > Tim > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > ---------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.814 / Virus Database: 271.1.1/2834 - Release Date: 04/25/10 02:31:00 ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.814 / Virus Database: 271.1.1/2834 - Release Date: 04/25/10 02:31:00