A UG-176 *is* a reducer for RG-8X.
> -----Original Message-----
> From: Repeater-Builder@yahoogroups.com
> [mailto:repeater-buil...@yahoogroups.com] On Behalf Of DCFluX
> Sent: Monday, May 03, 2010 4:39 PM
> To: Repeater-Builder@yahoogroups.com
> Subject: Re: [Repeater-Builder] LDF1-50 with PL259 & UG-176 ?
>
>
>
> Try the reducer meant for RG-8X.
>
> On Mon, May 3, 2010 at 11:21 AM, Jeff DePolo
> <j...@broadsci.com <mailto:jd0%40broadsci.com> > wrote:
> >
> >> Hi,
> >>
> >> I have read that one can put plain low cost PL259 connectors
> >> on FSJ1-50A Andrew 1/4 inch suplerflex using a UG-176 reducer.
> >
> > Yep.
> >
> >> Can the same be done with the Andrew LDF1-50 1/4" hardline?
> >
> > Nope. The OD of the shield is too big to fit into a UG-176
> reducer. FSJ1
> > is exactly a quarter inch OD without the jacket. LDF1 is
> 0.31". A UG-176
> > reducer is designed to fit over RG8X, RG59, et al which are
> typically 0.242"
> > OD. You can usually coerce the reducer onto FSJ1, but
> you'd have to drill
> > it out bigger to fit LDF1 into it.
> >
> > --- Jeff WN3A
> >
> >
> >
> > ------------------------------------
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.814 / Virus Database: 271.1.1/2842 - Release
> Date: 05/03/10 02:27:00
>
>
>
