If he can disconnect the output of the cans from the antenna adaptor then he can split it into two separate 2 channel units.
He might have to remount two of the cans in a separate chassis to eliminate any mutual coupling as necessary. Wayne Cornick IE Communications Inc. 21 West Front Street P.O. Box 67 Trenton, IL. 62293 618.224.7138 Phone 618.224.9006 FAX wa...@iecomm.com -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ted Leonard Sent: Thursday, May 27, 2010 1:33 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Fwd: DB4379UHF combiner To the group, I received the attached e-mail from a friend in the two way business. Does anyone know if his goal can be met as he describes below? Also could someone point me to the tuning instructions for this beast. Thank you, Ted W3VG -------- Original Message -------- Subject: DB4379UHF combiner Date: Thu, 20 May 2010 11:16:13 -0400 From: Robert Harvey <mailto:freedom...@windstream.net> <freedom...@windstream.net> To: Ted Leonard <mailto:n2...@verizon.net> <n2...@verizon.net> Ted, you're the filter guy. I have a DB products DB4379-4404B 4 channel UHF combiner. You did a little bit of tuning on it once in the shop. Do you know, or can you find out, if it can be turned into two, 2 channel combiners? I want to combine 461.625, 461.650, 463.625 & 463.650 but the combiner is speced at 50KHz spacing. There are two splits of only 25KHz on the frequencies I need to work with. Combining 461.625 and 463.625 on one combiner and antenna and combine 461.650 and 463.650 on another combiner and antenna would save me antennas and feedline and lots of money if I can modify the combiner I own. Bob Robert D. Harvey Freedom Communications, Inc aka: RDH / TransCom voice (716) 664-2659 fax (716) 483-5968 email freedom...@windstre <mailto:freedom...@windstream.net> am.net No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.819 / Virus Database: 271.1.1/2899 - Release Date: 05/27/10 01:25:00
