Hi yes sort of, getting a bit confused my end. What I usualy do is using a sig gen on the tx port put in the tx freq, terminate the ant port at 50 ohms put my analyser on the rx port and see what level of tx freq iam getting ie -80,-90 or whatever.
Steve ----- Original Message ----- From: "Tim" <tahr...@swtexas.net> To: <Repeater-Builder@yahoogroups.com> Sent: Monday, July 26, 2010 12:06 AM Subject: Re: [Repeater-Builder] Re: Repeater receiver testing > Hi Steve, > > I measured each way to the common point... RX to antenna & > Tx to antenna, and each one had a notch of about 102dB at > the opposite frequency. > > With the 50 watts at the antenna port is where I see the -55dBm > on the receiver port. (into the spectrum analyzer). > > Are these the measurements you mean? > > (you are up late tonite!) > > tim > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >