Norm's question was in reference to the mic jack not the RSS jack.
Norm,
the MTR2000 mic jack will work fine with most of Motorola's mobile mics except
for a select few. Can't give you a concrete answer without knowing which mic
you're concerned about.
Gary
---- Dave Clausen <nn...@yahoo.com> wrote:
> No...
>
> The mobiles use a RIB box, the MTR is serial direct to the radio. Here's a
> link
> to the pinout
>
> http://batlabs.com/mtr2kcab.html
>
> Dave
>
>
>
>
> ________________________________
> From: NORM KNAPP <nkn...@twowayradio.net>
> To: repeater-builder@yahoogroups.com
> Sent: Wed, August 4, 2010 12:51:00 PM
> Subject: [Repeater-Builder] MTR-2000 mic jac
>
>
> is the mic jack pin-out the same on the MTR-2000 repeater as it is on a
> Maxtrac
> or GM300 or M1225?
> Thanks
> Norm N5NPO
>
>
>
>
>