On Tue, 2008-12-16 at 21:48 -0500, Tom Sightler wrote: > Still, I think I remember that the qla2xxx_conf.ko module actually > stores the configuration for the adapter. The "module" actually > contains the data from /etc/qla2xxx.conf file which contains all of the > setup information for LUN binding, failover, etc. I'm guessing your > just copying "empty" versions of these modules and thus they contain no > actual config information and thus find no LUNS.
Hate to reply to my own post, but I also think you're supposed to load the qla2xxx_conf.ko file first as that module actually configures the card with the settings stored from SANsurfer. The driver itself is then loaded after the card is configured with the correct settings. This is shown in the document here: http://filedownloads.qlogic.com/files/driver/43531/README_qla2xxx2-6U3.htm Later, Tom _______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
