I think that these errors in messages are generated by smartd but i did
not configure smartd to monitor hda. that is why I asked about error in
messages and smartd
regards,
Collins, Kevin [BEELINE] wrote:
What exactly are you asking? Your subject says "smartd", but you seem to be asking about
/var/log/messages entries from "kernel". Those messages are not from smartd...
The kernel messages are common with cd/dvd drives, and I'm not sure there is
anything you can do to avoid them.
Also, why do you have your dvd/cd drive configured for smartd, whose purpose is to detect disk failure?
Thanks,
Kevin
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of FM
Sent: Wednesday, June 10, 2009 7:39 AM
To: Mailing List RHE 5
Subject: [rhelv5-list] smartd : error in messages
Hello,
My servers are using CCISS drive. The dvd/cd player is the only ATA device.
On the smartd.conf
I comment
DEVICESCAN -H -m root
and had :
/dev/cciss/c0d0 -a -d cciss,0 -s (S/../.././01|L/../../7/06) -m root
/dev/cciss/c0d0 -a -d cciss,1 -s (S/../.././01|L/../../7/06) -m root
but still receiving a lot of :
Jun 10 10:07:03 cluster01-node2 kernel: hda: drive_cmd: status=0x51 {
DriveReady SeekComplete Error }
Jun 10 10:07:03 cluster01-node2 kernel: hda: drive_cmd: error=0x04 {
AbortedCommand }
Jun 10 10:07:03 cluster01-node2 kernel: ide: failed opcode was: 0xec
It is hard to sort real error from these.
Is it a config setting or a bug ?
Regards
_______________________________________________
rhelv5-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/rhelv5-list
_______________________________________________
rhelv5-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/rhelv5-list
_______________________________________________
rhelv5-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/rhelv5-list
