The panic is pretty clear: > RAMDISK: Compressed image found at block 0 > invalid compressed format (err=1) > EXT2-fs: unable to read superblock > isofs_fill_super: bread failed, dev=md1, iso_blknum=16, block=32 > No filesystem could mount root, tried: ext2 iso9660 > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(9,1)
The initrd isn't in a format that the kernel recognizes. If you're booting from a CD, you might have a bad burn, or maybe your ISO is corrupted. Check the MD5 sum of your ISO.
If you're booting via PXE, verify that you're pointing to the right initrd.img, in pxelinux.cfg, and make sure that the initrd.img is the one from the original ISOs under images/pxeboot.
Paul Krizak 7171 Southwest Pkwy MS B200.3A Senior Systems Engineer Austin, TX 78735 Advanced Micro Devices Desk: (512) 602-8775 Linux/Unix Systems Engineering Cell: (512) 791-0686 Silicon Design Division Fax: (512) 602-0468 On 12/28/09 13:19, Arvind Navale wrote:
Hi Folks, I am installing RHEL-v5.3 on a Sun Fire x4240 (AMD 2.2GHz 6-Core Opteron 2427) and the system panics with following message. Any idea why its happening? Sorry for posting this long error message. ---------------------------------------------------------------------------------------------------------------------- Linux version 2.6.18-128.el5 (mockbu...@hs20-bc1- 7.build.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed D ec 17 11:41:38 EST 2008 Command line: initrd=initrd.img BOOT_IMAGE=vmlinuz text console=ttyS0,9600n8 ram disk_size=8262 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000099800 (usable) BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000d7fa0000 (usable) BIOS-e820: 00000000d7fae000 - 00000000d7fb0000 (usable) BIOS-e820: 00000000d7fb0000 - 00000000d7fbe000 (ACPI data) BIOS-e820: 00000000d7fbe000 - 00000000d BIOS-e820: 00000000d7ff0000 - 00000000d8000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000428000000 (usable) DMI present. SRAT: PXM 0 -> APIC 0 -> Node 0p, type ESC ( SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 0 -> APIC 2 -> Node 0 SRAT: PXM 0 -> APIC 3 -> Node 0 SRAT: PXM 0 -> APIC 4 -> Node 0 SRAT: PXM 0 -> APIC 5 -> Node 0 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 0-d8000000 SRAT: Node 0 PXM 0 0-428000000 Bootmem setup node 0 0000000000000000-0000000428000000 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump ACPI: PM-Timer IO Port: 0xe008 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 0:8 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 0:8 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic Processor #2 0:8 APIC version 16 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 0:8 APIC version 16 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) Processor #4 0:8 APIC version 16 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) Processor #5 0:8 APIC version 16 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disable ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 6, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x07] address[0xddeff000] gsi_base[24]) IOAPIC[1]: apic_id 7, version 17, address 0xddeff000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) Setting APIC routing to physical flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 0000000000099000 - 000000000009a000 Nosave address range: 000000000009a000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 00000000d7fa0000 - 00000000d7fae000 Nosave address range: 00000000d7fb0000 - 00000000d7fbe000 Nosave address range: 00000000d7fbe000 - 00000000d7ff0000 Nosave address range: 00000000d7ff0000 - 00000000d8000000 Nosave address range: 00000000d8000000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 00000000fec Nosave address range: 00000000fec01000 - 00000000fee00000 Nosave address range: 00000000fee00000 - 00000000fef00000 Nosave address range: 00000000fef00000 - 00000000ff700000 Nosave address range: 00000000ff700000 - 0000000100000000 Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000) SMP: Allowing 24 CPUs, 18 hotplug CPUs Built 1 zonelists. Total pages: 4133245 Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz text console=ttyS0,960 0n8 ramdisk_size=8262 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Checking aperture... CPU 0: aperture @ 480000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Nosave address range: 0000000004000000 - 0000000008000000 = 1.900 Volts Memory: 16435152k/17432576k available (2494k kernel code, 341276k reserved, 1263 = 1.700 Voltssor /SYS k data, 200k init) Calibrating delay using timer specific routine.. 4403.98 BogoMIPS (lpj=2201993) ipmi_name = FB0/FM0/PRSNTpe = Fan Security Framework v1.0.0 initializeditical_threshold = 1.000 Voltsensor85 SELinux: Initializing. selinux_register_security: Registering secondary module capabilityl_threshold = 0.800 Voltsm_status = cleared_threshold = 1.615 Volts Capability LSM initialized as secondary Mount-cache hash table entries: 256ecov_threshold = 0.600 Volts CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) type alarm_status = cl CPU: Processor Core ID: 0 lower SMP alternatives: switching to UP code = N/A1.205 Volts ipmi_name = M ACPI: Core revision 20060707 Using local APIC timer interrupts. lower_critical result 1250051193 Volts Detected 12.500 MHz APIC timer. upper_non SMP alternatives: switching to SMP codehold = 1.123 Volts = 2 Booting processor 1/6 APIC 0x1 lower_noncritical_t Initializing CPU#1 a Calibrating delay using timer specific routine.. 4400.28 BogoMIPS (lpj=2200144) /SYS/MB/V_+1V5 lower_critica CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) type = Voltage RPMue = CPU: L2 Cache: 512K (6ss = T Calibrating delay using timer specific routine.. 4400.16 BogoMIPS (lpj=2200084) /SYS/MB/V_+3V3STBYhreshold = 2800.000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)age lower_critical CPU: L2 Cache: 512K (64 bytes/line)BYVolts CPU 2/2 -> Node 0 lower_nonrecov_t CPU: Physical Processor ID: 0resent CPU: Processor Core ID: 2 alar Six-Core AMD Opteron(tm) Processor 2427 steppin CPU 3/3 -> Node 0= cleared CPU: Physical Processor ID: 0 upper_no CPU: Processor Core ID: 3/P Six-Core AMD Opteron(tm) Processor 2427 stepping 00 type = Voltageitical_threshold = 28 SMP alternatives: switching to SMP code ipmi_name = MB/V_+5Vpm Booting processor 4/6 APIC 0x4 /SYS/PADCR Initializing CPU#4 Sensorld = 2400.0 SMP alternatives: switching to SMP code Booting processor 5/6 APIC 0x5atus = cleared Initializing CPU#5 alarm_s Calibrating delay using timer specific routine.. 4400.28 BogoMIPS (lpj=2200143) alarm_ type = Paddle CardRPM_status = c CPU: L1 I Cache: 64K (64 bytes/line), D ipmi_name Six-Core AMD Opteron(tm) Processor 2427 stepping 00pmi_name = PDBf f Brought up 6 CPUsBUS_BAR,2Uopertie testing NMI watchdog ... OK. time.c: Using 25.000000 MHz WALL HPET GTOD HPET/TSC timer.part_number = 541-2073-08ritical_ time.c: Detected 2200.091 MHz processor.FB0/PR migration_cost=285= 0226LHF-0921B50s checking if image is initramfs...it isn't (invalid compressed format (err=1)); loperties: type = Power Supplysy ooks like an initrd Freeing initrd memory: 6485k freed NET: Registered protocol family 16 class = Discrete Sensorper No dock devices foun bus 0 -> pxm 0 -> node 0 ipm ACPI: PCI Root Bridge [PCIB] (0000:80) bus 128 -> pxm 1 -> node -1l_threshold = N/A ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *7 upper_noncritical_threshold = N/ ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.FB1/FM0 lower_noncritical_threshold = N/Ai ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. type = Fanld lo ACPI: PCI Interrupt Link [LNKD] (IR ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15s:cre Properties:P ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *14nit1/FM1/F0/TACH ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.res ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *7M ACPI: PCI Interrupt Link [LE3A] (IRQs 40 41 42 43) *0, disabled. upper_nonrecov_thr ACPI: PCI Interrupt Link [LE3B] (IRQs 40 41 42 43) *11e = PS0/PRSNT /SYS/FB1 ACPI: PCI Interrupt Link [LE3C] (IRQs 40 41 42 class = Discrete Se ACPI: PCI Interrupt Link [IIM1] (IRQs 44 45 46 47) *7 Properties: valu ACPI: PCI Interrupt Link [ISI0] (IRQs 44 45 46 47) *7 ipmi_na u ACPI: PCI Interrupt Link [ISI1] (IRQs 44 45 46 47) *7 /SYS/PS0/VINOKe = Indicator P ACPI: PCI Interrupt Link [ISI2] (IRQs 44 45 46 47) *7 i type = Po ACPI: PCI Interrupt Link [ILSM] (IRQs 44 45 46 47) *7 ipmi_name = PS ACPI: PCI Interrupt Link [ILPM] (IRQs 44 45 46 47) *0, disabled. class = Discrete Sensord = 2800.000 RP ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *15 = value = State Asser usbcore: registered new driver usbfsr_nonre f usbcore: registered new driver hub PCI: Using ACPI for IRQ routingONEalarm_status = clearedntcal_ PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report fru_part_number = 300-1897-04mi_name = PS1/ NetLabel: InitializingProperties: NetLabel: domain hash size = 128908BAO-0920A30F8Z NetLabel: protocols = UNLABELED CIPSOv4pmi_name = FB1/FM2/OKrS/MB NetLabel: unlabeled traffic allowed by default value = alarm_status PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture al /SYS/PS1/FAN_ pnp: 00:06: ioport range 0xf000-0xf07f has been reserved/FB1/FM2/SERVIC ty pnp: 00:06: ioport range 0xf080-0xf0ff has been reserved ipmi_name = PS1/I_IN class = pnp: 00:06: ioport range 0xf400-0xf47f has been reserved class = Threshold Sensor pnp: 00:06: ioport range 0xf480-0xf4ff has been reserved value = 0.500 Amps PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0clearedrt_number = MCP55 PCI: Bridge: 0000:00:06.0 type / IO window: 6000-6fff fru_ser MEM window: def00000-df7fffff1:28:3D:7B:0Ap PREFETCH window: disabled.Current PCI: Bridge: 0000:00:0a.0 cleared IO window: disabled.ru_name = DUAL MEM window: disabled.PS1/OUTPUT_POWERERS PREFETCH window: disabled. Properties:sion PCI: Bridge: 0000:04:02.0 type = Po IO window: 7000-7fffVoltageSt MEM window: dfa00000-dfafffff ipmi_name = PS1/OU PREFETCH window: disabled. PCI: Bridge: 0000:04:04.0 ipmi_name = PS1/PR PCI: Bridge: 0000:00:0e.0) Proc IO window: 7000-8fff MEM window: dfa00000-dfbfffff PREFETCH window: disabled. value = Presentcturer = AMD PCI: Bridge: 0000:00:0f.0 IO window: 9000-9fffatus = cleared_version MEM window: dfc00000-dfffffff Prope PREFETCH window: disabled.number = PCI: Bridge: 0000:80:0b.0:P0/D1/SVC IO window: disabled.= Power Supply MEM window: disabled.Properties: PREFETCH window: disabled.r = M PCI: Bridge: 0000:80:0f.0 IO window: 2000-2fff v MEM window: ddf00000-ddffffff PREFETCH window: disabled.s = clearedVC NET: Registered protocol family 2e = /SYS/PS IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) type = Power Supply TCP established hash table entries: 262144 (order: 10, 4194304 bytes) ipmi_name = MB/P0/D1ertie TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)048MB DDR-II 666pa TCP: Hash tables configured (established 262144 bind 65536) fru_manufacturer = TCP reno regi /SYS/MB/P0/D3anu Dquot-cache hash table entries: 512 (order 0, 4096 bytes)easserted type = Initializing Cryptographic API alarm_status = clearedB/P alg: No test for crc32c (crc32c-generic) ipmi_nam /S ksign: Installing public key data Pr Loading keyring - Added public key 5C0DC734E64D24FAms - User ID: Red Hat, Inc. (Kernel Module GPG key) fru_ io scheduler noop registered class = Threshold io scheduler anticipatory registered5 io scheduler deadline registered ÿÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ipm ipmi_name = FAN_FAULTn 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A value = Off 4.082.13 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 invalid compressed format (err=1) EXT2-fs: unable to read superblock isofs_fill_super: bread failed, dev=md1, iso_blknum=16, block=32 No filesystem could mount root, tried: ext2 iso9660 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(9,1) -------------------------------------------------------------------------------------------------------------------------------- Thank you, AN ------------------------------------------------------------------------ Hotmail: Trusted email with powerful SPAM protection. Sign up now. <http://clk.atdmt.com/GBL/go/177141665/direct/01/>
_______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
