Am 25.03.2010 13:44, schrieb Tim Edwards:
On 25/03/10 13:37, Rainer Traut wrote:
Here is a working example:
# cat /etc/sysconfig/network-scripts/route-eth1
ADDRESS0=192.168.200.0
NETMASK0=255.255.255.0
GATEWAY0=192.168.100.1
ADDRESS1=192.168.101.0
NETMASK1=255.255.255.0
GATEWAY1=192.168.100.1
Note: The ifup-routes script also supports an older syntax designed to be
used directly as an argument to "/sbin/ip route add". This syntax is
deprecated, but if no "ADDRESSn" lines are found the following will still
work:
192.168.2.0/24 dev ppp0
adds a network route to the 192.168.2.0 network through ppp0."
Ok, it's not feasible to deploy a deprecated syntax to my machines - too
many and too risky.
So I guess it's not possible to do apply the routes if they are in newer
syntax.
Thx
Rainer
_______________________________________________
rhelv5-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/rhelv5-list
