Le Lun 7 février 2011 13:26, carlopmart a écrit : > On 02/07/2011 01:02 PM, Jean-Yves LENHOF wrote: >> Le Lun 7 février 2011 10:42, carlopmart a écrit : >>> Hi all, >> >> <snip> >> >>> My question is: how can I assign static device names with udev rules >>> using by-path >>> or ID_PATH strings?? >>> >>> I need to create lvm volumes with these disks. >> >> If you'll be using using LVM, why do you want a specific name for your >> disk ? What is the point ? >> >> regards, >> > > I have configured 4 disks: > > - sdb: adapter 1, lun 0 > - sdc: adapter 1, lun 1 > - sdd: adapter 2, lun 0 > - sde: adapter 3, lun 0 > > If I need to add another virtual harddisk on adapter 1 with lun 2, all > disks names > after sdc will change. I need to avoid that.
And ? There must be a specific command to see the mapping between the LUN and discs if you want this information at a specific moment. But for me, but disk name can be changed and lvm will find all your logical volume without a hitch during the vgchange command at boot time... All the needed information are stored in the private part of the lvm partition of the disk. Regards, _______________________________________________ rhelv6-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv6-list
