Hello, After upgrading from kernel 2.6.32-71.29.1.el6.x86_64 onto 2.6.32-131.0.15.el6.x86_64, the console and kernel fill up with following messages:
[bnx2x_extract_max_cfg:1079(eth11)]Illegal configuration detected for Max BW - using 100 instead [bnx2x_extract_max_cfg:1079(eth10)]Illegal configuration detected for Max BW - using 100 instead [bnx2x_extract_max_cfg:1079(eth9)]Illegal configuration detected for Max BW - using 100 instead [bnx2x_extract_max_cfg:1079(eth12)]Illegal configuration detected for Max BW - using 100 instead Today upgraded onto kernel 2.6.32-131.2.1.el6.x86_64, but to no avail. RHEL6.1 installed on a HP-Blade bl460c-g6 with VirtualConnect, so the server has 8 virtual networking devices from which 2 are active. I've teamed all 8 devices into one bonding device. network-scripts]# cat ifcfg-eth8 DEVICE="eth8" BOOTPROTO="static" NM_CONTROLLED="yes" ONBOOT="yes" SLAVE=yes MASTER=bond0 These messages only show up for the 6 devices which are not active, and the servers network conenctivity seems to be ok. Should I change this setup, or use a special module parameter on loading bnx2x, or a regression bug maybe? Cheers, Andre _______________________________________________ rhelv6-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv6-list
