Jason Keltz <[email protected]> wrote: > Hi Greg, > > I believe /dev/disk/by-label is available, and I looked into using that, > but still, if the usb key becomes /dev/sda, then this will effect > installation of bootloader, etc. hard to work around. > Does red hat not support installation via usb key? > I'm not using multipath so I don't have /dev/disk/by-scsi-id.. > In this particular case, the system has a 3ware 9750-8e card (which is > referred to first in bios).. > > I wish there was some way to force the usb device as being sdb.
I have been playing with this for some time... I haven't completed my playtime yet, but my research indicates this: Redhat 3 and 4 do not support referring to partitions by label, but 5 and 6 do. Try using this line in your kickstart file and pointing it to the label on your USB stick: harddrive --dir=/ --partition=LABEL=blahblah HTH, _______________________________________________ rhelv6-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv6-list
