Hello! We have riak cluster for riak-cs. Failed node riak@192.168.0.133 has been replaced via 'riak-admin replace' by riak@192.168.0.141 (new node), then cleaned up, prepared and joined to cluster as new. Member-status after last 'riak-admin cluster commit', when all transfers complete:
================================= Membership ================================== Status Ring Pending Node ------------------------------------------------------------------------------- valid 8.6% -- 'riak@192.168.0.130' valid 8.2% -- 'riak@192.168.0.131' valid 8.2% -- 'riak@192.168.0.132' valid 8.2% -- 'riak@192.168.0.133' valid 8.2% -- 'riak@192.168.0.134' valid 8.2% -- 'riak@192.168.0.135' valid 8.2% -- 'riak@192.168.0.136' valid 8.2% -- 'riak@192.168.0.137' valid 8.2% -- 'riak@192.168.0.138' valid 8.2% -- 'riak@192.168.0.139' valid 8.2% -- 'riak@192.168.0.140' valid 9.4% -- 'riak@192.168.0.141' ------------------------------------------------------------------------------- Valid:12 / Leaving:0 / Exiting:0 / Joining:0 / Down:0 Every node have 3.6T raid. Free place on disk and used %: 192.168.0.130 996G 73% 192.168.0.131 1.2T 69% 192.168.0.132 1.2T 68% 192.168.0.133 1.1T 70% 192.168.0.134 1.1T 70% 192.168.0.135 1.2T 69% 192.168.0.136 1.2T 68% 192.168.0.137 1.2T 69% 192.168.0.138 1.2T 69% 192.168.0.139 1.2T 69% 192.168.0.140 1.2T 68% 192.168.0.141 808G 78% Problem: on 192.168.0.141 very little free space compared to rest, which may affect in merges on this node after uploading some additional data into cluster. Software versions: ii riak 2.1.3-1 amd64 Riak is a distributed data store ii riak-cs 2.0.0-1 amd64 Riak CS Can i rebalance riak without adding/removing nodes or any hardware changes? -- Stanislav _______________________________________________ riak-users mailing list riak-users@lists.basho.com http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
