I had a bvery similar problem, but with a complete loss of sound. I put it down to the local ISP who owns the network and also sells Net-phone facility. Try going through a vpn. Cheers!
On Mon, 17 Dec 2018 at 10:54, Anonymousemail.me <nore...@anonymousemail.me> wrote: > This message was sent via *anonymousemail* > To remove this signature and unlock all features go premium > <https://anonymousemail.me/premium.php> > Hi, > > The Dec 3 client couldn't be started from the gnome search box, it could > be started from the terminal but calls didn't work. It was possible to > launch the Dec 10 client from the search box, but calls still would not > connect. Now, with the Dec 11, 12 and 16 client versions, a video call > freezes very shortly into it- usually less than a minute if not 30s. This > used to be the case in the past when I set Ring to use the VP8 decoder. > Doing this now, I still got a frozen video frame. An audio call lasted just > a short while longer- between 2 and 3 minutes. I install manually as I only > have the official Debian repos enabled. It's a 64 bit computer with an AMD > processor. The sanitized log sections which I thought are relevant are > posted below. Sometimes the 'reallocation error: abort: success' message > would also be present. > > Merry Christmas to one and all. > > > dring -d -c > > 2323|sip_utils.cpp :111 ] Registered thread 0xa0a0a0a0a0a0 (0x1234) > 2323|sinkclient.cpp :100 ] ShmHolder[Ring Daemon_shm_6262_0]: new > sizes: f=3064200, a=6263434 > [sdp @ 0x1b1b1b1b1b1b] max delay reached. need to consume packet > [sdp @ 0x1b1b1b1b1b1b] RTP: missed 6 packets > [h264 @ 0x2c2c2c2c2c2c] corrupted macroblock 26 27 (total_coeff=-1) > [h264 @ 0x2c2c2c2c2c2c] error while decoding MB 26 27 > [sdp @ 0x1b1b1b1b1b1b] max delay reached. need to consume packet > [sdp @ 0x1b1b1b1b1b1b] RTP: missed 4 packets > [sdp @ 0x3d3d3d3d3d3d] max delay reached. need to consume packet > [sdp @ 0x3d3d3d3d3d3d] RTP: missed 1 packets > 2542|media_decoder.cpp :222 ] Hardware accelerated decoding disabled by > user preference > 2542|media_decoder.cpp :222 ] Decoding video using H.264 / AVC / MPEG-4 > AVC / MPEG-4 part 10 (h264) > 2542|sinkclient.cpp :100 ] ShmHolder[Ring Daemon_shm_6262_1]: new > sizes: f=0, a=111 > 2542|sinkclient.cpp :189 ] ShmHolder: new holder 'Ring > Daemon_shm_6262_1' > 2542|sinkclient.cpp :555 ] Start sink <9999999999999999999 / Ring > Daemon_shm_6262_1>, size=640x480, mixer=0 > 2542|sinkclient.cpp :100 ] ShmHolder[Ring Daemon_shm_6262_1]: new > sizes: f=1112233, a=2355599 > [h264 @ 0x4f4f4f4f4f4f] corrupted macroblock 26 27 (total_coeff=-1) > [h264 @ 0x4f4f4f4f4f4f] error while decoding MB 26 27 > 2878|ringaccount.cpp :2020 ] [Account 4e4e4e4e4e4e4e4e] Dht status : > IPv4 connected; IPv6 disconnected > 2878|ringaccount.cpp :2020 ] [Account 4e4e4e4e4e4e4e4e] Dht status : > IPv4 connected; IPv6 connecting > 2878|ringaccount.cpp :2020 ] [Account 4e4e4e4e4e4e4e4e] Dht status : > IPv4 connected; IPv6 disconnected > > > gnome-ring -d > > slotCallStateChanged (call: 1111111111111111111), from Incoming to Talking > ** (gnome-ring:2222): DEBUG: call has status Talking, hiding > ** (gnome-ring:2222): DEBUG: call has status Talking, hiding > ** (gnome-ring:2222): DEBUG: call has status Talking, hiding > vCard image loading failed > (gnome-ring:2222): GdkPixbuf-DEBUG: gdk_pixbuf_from_pixdata() called on: > (gnome-ring:2222): GdkPixbuf-DEBUG: Encoding raw > (gnome-ring:2222): GdkPixbuf-DEBUG: Dimensions: 10 x 10 > (gnome-ring:2222): GdkPixbuf-DEBUG: Rowstride: 48, Length: 909 > (gnome-ring:2222): GdkPixbuf-DEBUG: Copy pixels == false > (gnome-ring:2222): GdkPixbuf-DEBUG: gdk_pixbuf_from_pixdata() called on: > (gnome-ring:2222): GdkPixbuf-DEBUG: Encoding raw > (gnome-ring:2222): GdkPixbuf-DEBUG: Dimensions: 10 x 10 > (gnome-ring:2222): GdkPixbuf-DEBUG: Rowstride: 48, Length: 909 > (gnome-ring:2222): GdkPixbuf-DEBUG: Copy pixels == false > QObject: Cannot create children for a parent that is in a different thread. > (Parent is Video::ShmRenderer(0x1b1b1b1b1b1b), parent's thread is > QThread(0x0a0a0a0a0a0a), current thread is QThread(0x2b2b2b2b2b2b) > QObject: Cannot create children for a parent that is in a different thread. > (Parent is Video::ShmRenderer(0x4d4d4d4d4d4d), parent's thread is > QThread(0x3c3c3c3c3c3c), current thread is QThread(0x2b2b2b2b2b2b) > -- *In a world without walls and fences, what need have we for Windows or Gates? *
