Hi all, I have a probe that's been down for several days now. I did contact RIPE about it, but support has been superficial. I also didn't yet find the level of technical detail I need in the information on the website and in this list's archives.
The 8GB drive, when reformatted on a windows box with FAT32 as per support instructions, surprisingly only comes out with a 1GB partition. Inspecting the drive under linux, I find multiple partitions, with only the first containing an a fat32 filesystem: Platte /dev/sdc: 7927 MByte, 7927234560 Byte 244 Köpfe, 62 Sektoren/Spur, 1023 Zylinder, zusammen 15482880 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Festplattenidentifikation: 0xc3072e18 Gerät boot. Anfang Ende Blöcke Id System /dev/sdc1 2048 2099199 1048576 b W95 FAT32 /dev/sdc2 2099200 4196351 1048576 83 Linux /dev/sdc3 4196352 6293503 1048576 83 Linux On first glance, the others contain ext2 filesystems # fsck -N /dev/sdc? fsck von util-linux 2.20.1 [/sbin/fsck.vfat (1) -- /dev/sdc1] fsck.vfat /dev/sdc1 [/sbin/fsck.ext2 (2) -- /dev/sdc2] fsck.ext2 /dev/sdc2 [/sbin/fsck.ext2 (3) -- /dev/sdc3] fsck.ext2 /dev/sdc3 but on further inspections do not contain a valid magic number in their superblocks, so they are effectively unformatted. I would therefore suspect that they are not being used by the probe. Now the question: What is the correct layout supposed to look like (primary/secondary, size, ID, FS-type)? I would like to get my probe back up and running. Bonus question: What can I expect to find in point of files/data on the drive, that would tell me whether the probe was working correctly until I cut power and removed the drive? Thanks, Michael
